1556188637@qq.com
+86-13322996843

Why is the power adapter bad? What should I do if it is brok

Source:AdminAuthor:WPOWER Addtime:2019-05-21 Click:
Why is the power adapter bad? What should I do if it is broken?
 
Through the following five steps, you can check the power adapter well. Of course, if there are no big problems, it is best not to open the case easily. If you need it, it is better to find a professional and better.
Five steps to repair the power adapter:
 
First, if there is a problem with the original adapter, it can't be repaired or it can't be repaired, you can use other adapters instead, as long as the output voltage and power are roughly equal. There is also a voltage regulator circuit inside the laptop, don't worry too much about the output voltage mismatch. In the repair, the first step is to prepare the tool. We need a multimeter, a screwdriver, and a welding tool.
 
Second, there are four plastic caps on the power adapter. Do not damage the adapter casing as much as possible. After the shell is damaged, electromagnetic radiation will be strengthened and the machine will be stable. If the shell is damaged, try to fix it. During the disassembly process, if the external power supply is not powered, you can try plugging in the battery. If the machine can start normally, there may be a problem with the power cord or the adapter. Open the appearance, open the shielding layer, it is best to first check the soldering feet, the naked eye can be observed, the circuit is intermittent, generally poor contact. Then use a multimeter to check if there is any problem with the power cord to simplify the maintenance.
 
Third, during the test, if the resistance pin is found to be soldered, and then soldered with a soldering tool, the power adapter is installed again, and the test is started. The problem is solved. It should be noted that if there is a problem with a certain capacitor during the detection process, you can purchase a capacitor with a model and capacity (price is about 5 yuan), then solder the defective capacitor and solder the new capacitor. Just fine. If you find that there is a problem with the IC power chip, you can solve it in the same way. Of course, since the IC chip is definitely one of the most important electronic components in the power adapter, the capacitor is too complicated.
 
Fourth, the optional power adapter in the repair process, because the current power adapter has a large number of patch components, once the component is out of order, the maintenance is more difficult. The power of the power adapter is also increasing day by day, so that the test of electronic components is getting bigger and bigger. If the quality of the electronic components used in the power adapter is not good and the PCB is improperly wired, it is likely to increase the probability of failure. Therefore, the purchase of a good quality power adapter is very helpful for the stability of the notebook.
 
Fifth, check the capacitor resistance and inductance for any problems. If the capacitor has a bulge, it is best to replace it in time to avoid potential hazards.
 
The above is the five major steps of power adapter repair. Through these five steps, you can check the power adapter well. Of course, if there are no big problems, it is best not to open the case easily. If you need it, it is better to find a professional and better.   

      Shenzhen WPOWER Co., Ltd. is 12V6A AC/DC Power Adapter,24V3A Power Adapter,24V3A Power Adapter Manufacturer,5V8A AC/DC Adapter,5V8A AC/DC Adapter Supplier,15V5A Switching Power Supply Adapter Factory,15V5A Switching Power Supply Adapter,15V5A Switching Power Supply Wholesaler  and other products specializing in production and processing. The company has complete production equipment and testing equipment, first-class sales team and independent high-level research and development team. Products have passed UL, CE, FCC, KC, PSE, SAA, GS and other certifications. To learn more about the AC/DC Power adapter Wholesaler, please log in to the power supply - WPOWER official website!